Meaning and Purpose
This photo shoot was
Long list
Short list
Photo:1
I set the cameras shutter speed to 1/1000 this allowed me to capture a sharper image but it allowed less light in so i set the iso to high 4000 this allowed an increased light sensitivity but it also created a slightly grainy photo but this ok because it fits in with the feel of my photo shoot.I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus.In this photo I used rule of thirds by putting my model on the left line and the stick on the right it means that my points of inrest are the stick and the model which will draw the reader in and draw him into the product.
Photo: 1
I set the cameras shutter speed to 1/1600 this allowed me to capture a sharper image but it allowed less light in so i set the iso to high 4000 this allowed an increased light sensitivity but it also created a slightly grainy photo but this ok because it fits in with the feel of my photo shoot.I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus.In this photo I used rule of thirds by putting my model on the left line and the stick on the right it means that my points of inrest are the stick and the model which will draw the reader in and draw him into the product.
Photo:2
I set the cameras shutter speed to 1/1000 this allowed me to capture a sharper image but it allowed less light in so i set the iso to high 4000 this allowed an increased light sensitivity but it also created a slightly grainy photo but this ok because it fits in with the feel of my photo shoot.I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus.In this photo I used rule of thirds by putting my model on the left line and the stick on the right it means that my points of inrest are the stick and the model which will draw the reader in and draw him into the product.
Photo:3
I set the cameras shutter speed to 1/50 this kept the camera lens open for longer letting in more light to compensate this i set the iso to a low 500 this allowed an decreased light sensitivity which stopped the photo from being to bright .I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus.In this photo I used rule of thirds by putting my model on the left line and the stick on the right it means that my points of inrest are the stick and the model which will draw the reader in and draw him into the product.I used leading lines because the stick is where here spine will be.
Photo:4
I set the cameras shutter speed to 1/50 this kept the camera lens open for longer letting in more light this could allow the photo to amplify camera shake so i attached the camera to a tripod.to compensate for the increased amount of light i set the iso to a low 500 this allowed an decreased light sensitivity which stopped the photo from being to bright .I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus and gives the effect that the model is hoping out of the background .In this photo I used rule of thirds
Photo:5
I set the cameras shutter speed to 1/50 this kept the camera lens open for longer letting in more light this could allow the photo to amplify camera shake so i attached the camera to a tripod to compensate for the increased amount of light thanks to the increased duration of time the lens is open i set the iso to a low 500 this lower the cameras leith sensitivity keeping the photo dark inline with the theme .I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus it also gives the appearance that model pops from the background .In this photo I used rule of thirds
Photo:6
I set the cameras shutter speed to 1/64 this this kept the camera lens open for longer letting in more light this could allow the photo to amplify camera shake so i attached the camera to a tripode to allow for the increase in light I reduced the iso to 500 this allowed an decreased in light sensitivity so created a darker photo that fits with the brief .I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus it also appears the model is poping out of the background .In this photo I used rule of thirds
Photo:7
I set the cameras shutter speed to 1/50 this kept the camera lens open for longer letting in more light this could allow the photo to amplify camera shake so i attached the camera to a tripod to compensate for the increased amount of light thanks to the increased duration of time the lens is open I reduced the iso to 500 this allowed an decreased in light sensitivity so created a darker photo that fits with the brief.I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus.In this photo I used rule of thirds
Photo:8
I set the cameras shutter speed to 1/40 this kept the camera lens open for longer letting in more light this could allow the photo to amplify camera shake so i attached the camera to a tripod to compensate for the increased amount of light thanks to the increased duration of time the lens is open I reduced the iso to 500 this allowed an decreased in light sensitivity so created a darker photo that fits with the brief.I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus.In this photo I used rule of thirds
Photo:9
I set the cameras shutter speed to 1/50 this kept the camera lens open for longer letting in more light this could allow the photo to amplify camera shake so i attached the camera to a tripod to compensate for the increased amount of light thanks to the increased duration of time the lens is open I reduced the iso to 500 this allowed an decreased in light sensitivity so created a darker photo that fits with the brief.I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus.In this photo I used rule of thirds
Photo:10
I set the cameras shutter speed to 1/250 this kept the camera lens open for shorter amount of time letting in less light this could allow the photo to appear darker to compensate for the decreased amount of light thanks to the decreased duration of time the lens is open I increased the iso to 3200 this allowed an increase in light sensitivity .I set the aperture to F5.6 this is a large aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus and allows the photo to be sharper .In this photo I used rule of thirds
Photo:11
I set the cameras shutter speed to 1/250 this kept the camera lens open for shorter amount of time letting in less light this could allow the photo to appear darker to compensate for the decreased amount of light thanks to the decreased duration of time the lens is open I increased the iso to 3200 this allowed an increase in light sensitivity .I set the aperture to F5.6 this is quite a large aperture this means that the opening is small given this a shallow depth of field which is good because it means that my model is in focus and sharper then if it had a deeper depth of feild.
Photo:12
I set the cameras shutter speed to 1/250 this kept the camera lens open for shorter amount of time letting in less light this could allow the photo to appear darker to compensate for the decreased amount of light thanks to the decreased duration of time the lens is open I increased the iso to 3200 this allowed an increase in light sensitivity .I set the aperture to F5.6 this is a very a large aperture this means that the opening is very small given this a shallow depth of field which is good because it means that my model is very sharp and so is the background and shadow .In this photo I used rule of thirds
Photo:13
I set the cameras shutter speed to 1/250 this kept the camera lens open for shorter amount of time letting in less light this could allow the photo to appear darker to compensate for the decreased amount of light thanks to the decreased duration of time the lens is open I increased the iso to 3200 this allowed an increase in light sensitivity .I set the aperture to F5.6 this is a fairly large aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus and sharp and so is the background and shadow .In this photo I used rule of thirds
Photo:14
I set the cameras shutter speed to 1/250 this kept the camera lens open for shorter amount of time letting in less light this could allow the photo to appear darker to compensate for the decreased amount of light thanks to the decreased duration of time the lens is open I increased the iso to 3200 this allowed an increase in light sensitivity .I set the aperture to F7.1 this is a really large aperture this means that the opening is very small giving this a very shallow depth of field which is good because it means that my model is in focus and it makes the stick very sharp .In this photo I used rule of thirds
Photo:15
I set the cameras shutter speed to 1/250 this kept the camera lens open for shorter amount of time letting in less light this could allow the photo to appear darker to compensate for the decreased amount of light thanks to the decreased duration of time the lens is open I increased the iso to 3200 this allowed an increase in light sensitivity .I set the aperture to F7.1 this is nearly maximum aperture this means that the opening is nearly completely shut giving this a really shallow depth of field which is good because it means that my model is in focus and really sharp.
Photo:16
I set the cameras shutter speed to 1/160 this kept the camera lens open for longer letting in more light this could allow the photo to amplify camera shake so i attached the camera to a tripod to compensate for the increased amount of light thanks to the increased duration of time the lens is open I increased the iso to 3200 this allowed an increased in light sensitivity so created a lighter photo that isnt over exposed or to dark with the brief.I set the aperture to F5.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus.In this photo I used rule of thirds
Photo:17
I set the cameras shutter speed to 1/1328 this kept the camera lens open for longer letting in more light this could allow the photo to amplify camera shake so i attached the camera to a tripod to compensate for the increased amount of light thanks to the increased duration of time the lens is open I reduced the iso to 500 this allowed an decreased in light sensitivity so created a darker photo that fits with the brief.I set the aperture to F4.0 this is quite a small aperture this means that the opening is quite small given this a shallow depth of field which is good because it means that my model is in focus.In this photo I used rule of thirds
Photo:28
Photo:18
Photo:19
No comments:
Post a Comment